6
/ 28
User Manual
Rev. 1.0 - 29/11/16
BLUES30/50NV
ELETTRONICA
4.4 Rear Panel Description
[1] MAIN FUSE
Fuse for mains supply.
[2] MAINS
Standard IEC connector for mains supply.
[3] AIR FLOW
Grid for the passage of the air flow of the forced ventilation.
[4] R.F. OUT
RF output connector, N-type.
[5] RF TEST
Not used.
[6] LAN
RJ45 connector for TCP/IP communication.
[7] INTERLOCK IN
BNC input interlock connector: the exciter is forced in stand-
by mode when the inner conductor is grounded.
[8] REMOTE
DB15 connector to telemetry the equipment.
[9] FWD EXT. AGC
Trimmer to control the limitation on delivered power in
function of the FWD fold input (REMOTE connector).
[10] RFL EXT. AGC
Trimmer to control the limitation on delivered power in
function of the RFL fold input (REMOTE connector).
[11] PILOT OUT
BNC output for the pilot tone. This can be used for external
devices synchronization (e.g. RDS coders).
[12] SCA 2
BNC connector , for SCA2 input.
[13] SCA2 ADJ
Adjustment trimmer, for SCA2 input.
[14] SCA 1
BNC connector , for SCA1 input.
[15] SCA1 ADJ
Adjustment trimmer, for SCA1 input.
[16] MPX
BNCconnector , for MPX input.
[17] MPX ADJ
Adjustment trimmer, for MPX input.
[18] LEFT-MONO
XLR connector, for balanced LEFT-MONO channel input.
[19] LEFT-MONO ADJ
Adjustment trimmer for the LEFT-MONO channel input.
[20] RIGHT ADJ
Adjustment trimmer for the RIGHT channel input.
[21] RIGHT
XLR connector, for balanced RIGHT channel input.
[22] LEFT-MONO ADJ
Adjustment trimmer for the digital LEFT-MONO channel
input.
[23] AES-EBU
Balanced XLR connector for input in AES/EBU digital audio
format.
[24] RIGHT ADJ
Adjustment trimmer for the digital RIGHT channel input.
