APEX1930 USER
MANUAL V1.0.00 Tech Support: 1-888-317-8766
4
AGC prevents the repeater from exceeding its maximum output power by reducing the gain
automatically. AGC is used to adjust the gain to an appropriate level for a range of input signal
levels
.
ASD (Automatic Shutdown)
ASD does not:
1. prevent oscillation
2. protect from excessive input.
ASD helps protect the amplifier from over load. ASD helps protect the network by preventing
excessive signal output power.
There are three parameters:
ASD Level
,
ASD Time
, and
ASD Iteration
.
If the output power exceeds higher than the “
ASD LEVEL
”, the repeater will shut down for “
ASD
TIME
” seconds. If shutdown repeats “Iteration” times, the repeater will require manual re-start.
