Installation
Technical Specifications
Model No.
R-Tech POWER MTS210D
Input
240V 1 ~ AC 50/60Hz
Operation
Rated Input Power
8.2 KVA
Rated Input Current
I-Max 34AMPS / I-Eff 20AMPS
Fuse rating
20 AMPS
Rated Output Current
200 AMPS TIG/MIG – 175 AMPS MMA
Duty Cycle 35% @ 40
O
C
200A MIG/TIG ,175A MMA
Duty Cycle 100% @ 40
O
C
130A MIG/TIG,100A MMA
Output current Range
MIG: 25-200 AMPS
MMA: 10-175 AMPS
TIG: 10-200 AMPS
No Load Voltage
60~80V
MIG Voltage Adjustment
Range
14V - 26V± 3V
Suitable Wire Diameter
0.6mm 0.8mm 1.0mm
Insulation
Class F
Read entire section before starting installation
WARNING!
Electric Shock can kill Only qualified personnel should perform this installation. Turn off input power at the fuse
box before working on this equipment. Do not touch electrically live parts. Always connect the machine to an
earthed mains supply as per national recommended standards.
Select suitable location
Place the welder where clean cooling air can freely circulate in and out of the front & rear louvre vents. Dirt, dust or
any foreign material that can be drawn through vents into welder must be kept to a minimum. Failure to observe
these precautions can result in excessive operating temperatures which can lead to plant failure.
Grinding
Do not direct grinding particles towards the welder. An abundance of conductive material can cause plant failure.
Stacking
5
