4
The R-Tech Plasma 80HF is a member of our field acclaimed family of welding products.
Premium features include:
-
1. Inverter power source – more efficient to operate, provides smoother weld
characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF Pilot start – Enables easy arc start even on painted surfaces
4. HF pilot arc restart – ideal for cutting mesh etc
5. Digital amp meters
6. Quick fitting torch for easy torch fitment/replacement
7. Long life – Low cost torch consumables
8. 60% Duty cycle at 40 Amps @ 40
º
C
Recommended Processes
The R-Tech Plasma 80HF is recommended for the plasma cutting processes within its output
capacity of 80 Amps DC
Equipment Limitations
The R-Tech Plasma 80HF is protected from overloads beyond the output ratings and duty cycle
as per machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 80HF is rated at 80 Amps at 60% duty cycle on a ten minute basis. If the
duty cycle is exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
MODEL
PLASMA 80HF
Power Voltage
415V 3-Phase 50/60Hz
Input Current
17.6 Amps
Rated Output Current
80 Amps
Current Adjusting Range
20-80 Amps
No-load Voltage
200V
Rated Duty Cycle
60%
Working Mode
HF Start
Air Pressure
55 PSI
Max. Cutting Thickness (Clean cut mild steel)
22 mm
Max. Cutting Thickness (Severance cut mild steel)
32 mm
After Flow Time
10 Seconds
Dimensions / Weight
620x260x550 mm / 30KG
Safety Precautions
Summary of Contents for PLASMA 80HF
Page 2: ...2 Thank you for selecting the R Tech Plasma 80HF Inverter Plasma Cutter...
Page 17: ...17 Plasma torch switch TS1 Wiring Diagram...
Page 18: ...18...
Page 19: ...19...