R-Quest TCP-7200, User Manual

Page: 27 / 38

27
Key String
Key Strings are 14 characters long. Available characters are 0-9 and A-Z.
Numbers
Numbers are 4 digits long. Available digits are 0-9.
Disc Image names can be entered using the ‘Last Char Name’. Please also
see ‘Last Char Name’ under Duplication Options above.
Copying Discs
There are two basic methods of copying Discs. The first is to read a master &
start copying immediately. The second is to start copying using a master
image already stored on the internal hard disk (usually created by a previous
Copy job, or by using the
Image Functions | Load New Master
function).
To start copying from a new master, use the up ( /\) or down ( \/) arrow keys to
adjust the cursor. The > cursor (on the Left of the LCD display) is next to the
Start Copying
menu line. Press the
ENTER
key to select that menu function. If
there is already an image on the hard drive the following prompt will be
displayed:
Read New Master?
If there are no master images currently on the hard disk, this message will not
appear. Press the YES key. The next prompt will be for an Image name.
Enter Image Name
[
]
Use the /\, \/, > & < keys to enter a name for the image (see Entering Text). To
use the default name (“NONAME”) just press the ENTER key. Next the
system will ask for the number of Discs to copy:
Enter Quantity
[0000]
Place the desired number of blank discs into the input stack of the loader.
Then, using the /\, \/, < & > keys enter the required quantity to copy (see
Entering Numbers). When the display shows the required count, press the
ENTER
key. The top drive tray will open and the following prompt will be
displayed:
Insert Master Disc
Press ENTER key.