R-Quest TCP-7200, User Manual

Page: 15 / 38

15
While a menu is being displayed the STOP key (escape on a USB keyboard)
backs up 1 level higher in the menu structure.
LCD Display
The LCD display is used either to display menus or to show status. For
instance while copying it shows what it is doing, the number it has to do, how
many it has done and the current mode (such as Burn or Simulate).
Menu Structure
Use the up /\ and down \/ arrow keys to position the cursor (a > character on the
left most column of the display) to the desired menu item. Then use the ENTER
key to select it.
Following is a description of each menu selection.
Copy
Use this menu option to start copying discs by reading the master to the hard
disk and then copy from the hard disk image. See the Copying section of this
chapter for further instructions
Compare
Use this menu option to start verifying copies. See the Verifying section of this
chapter for further instructions.
Batch Mode
Use this menu option to start Batch copying of discs. In batch mode, you
interleave blank discs with masters, so that you can automatically create
copies from several master discs – unattended.
WARNING - VERY IMPORTANT
:
DO NOT use BD-RE discs as ‘master discs’ while in batch mode. It
will be re-formatted and re-written.
Image Functions
This menu option is used to maintain image files kept on the hard drive. This
menu item will not be shown if Multi Image HD is not enabled in the
Setup Menu
| Job Options
function.