R-Quest TCP-7200, User Manual

Page: 23 / 38

23
NOTE:
Slowing the read speed down can sometimes help reading
scratched or otherwise damaged discs.
Read Data
Select the speed used when the Master drive reads data tracks.
Read Audio
Select the speed used when the Master drive reads audio tracks.
Write
Select the speed used when the writing (recording / burning).
NOTE:
Make sure the Disc media being used is rated for the speed being
used. For instance if writing DVDs at 16X, ensure the media is
rated for 16X write. Global DiscWare cannot guarantee that all
recorders will record all media brands at their maximum rat ed
speed. If the recorder firmware is not optimised for this specific
brand of media, slower recording speeds may be automatically
selected by the recorder’s own firmware in order to make the best
possible quality recording.
Password Menu
The TCP series copiers allow access to be restricted by passwords. A
different password can also be set for general use (Operator Password),
and for system set-up (Set-up Password). The passwords operate
independently of each other, so it is possible, for instance, to have a
password required for set-up, but no password required for Operator use. It
is also possible to have a single Operator Password to give access to the
whole machine, without additional password requirements for the Set-up
Menu. Passwords are optional. Many users never need to use passwords.
Each password must be set-up separately. By default, no password is
active, and the machine can be used without passwords. To enable a
password, choose either.
Operator Password or Set-up Password from the Set-up Menu then select
Enable Password.
The system will request a default password. This is a password that is fixed
within every machine – and cannot be changed. The default password is:
YES ENTER YES ENTER YES ENTER . The reason for a default password
is to prevent passwords being enabled accidentally.