R-Quest TCP-7200, User Manual

Page: 20 / 38

Set-up Menu
These menus are used to select various options available on the TCP
Autoloader. Some menu options may depend on the settings of other options,
so the actual menus that appear are context sensitive.
Job Options
These functions set up options used during the duplication process. Use
the up arrow /\ key to scroll up or press the down arrow key \/ to scroll
down. Press the YES or NO key to select the desired values.
When the displayed selections are correct press the ENTER key to save or
press the STOP key to exit and leave the options unchanged.
Burn Discs
If set to NO the system is in simulate mode and will not actually write a
disc. It goes through all the motions and is a good test to see if the TCP
Autoloader is in operating condition.
NOTE:
If this is set to NO the following warning message will be displayed:
WARNING Copier is in SIMULATE mode, Press YES to continue or any other
key to cancel
and the BURN/SIM field of the LCD will show SIM (for
Simulate Burn) while copying discs.
Compare Master
If set to YES the Master Disc will be read a second time and the new
read compared with the first. If the data are not the same a BAD
MASTER error will be displayed.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD.
This is not a limitation of the TCP series, but a limitation of the CD
format low-level error correction systems.
Compare Copy
If set to YES every disc recorded will be re-read and compared to the
data written immediately following the recording (the disc will be verified).
If the data are not the same or there is a read error the disc will be
considered bad and rejected.
NOTE:
This feature is disabled for any Audio or Video tracks on the CD.
This is not a limitation of the TCP series, but a limitation of the CD
format low-level error correction systems.