R.P.S. Corporation 200, Operator'S Manual

Page: 7 / 25

PAGE 3
200
(10-gauge) 1/8” steel
1,200 pounds
(2) 9” x 2”
(2) 4” x 2”
44” x 24” x 40”
620 pounds
274 pounds
(1) 20 inches
(1) 2.5 hp (2000 RPM)
(1) 3.0 hp (2500 RPM)
Direct
0 - 75 pounds
Infinite
(3) 210 AH
Up to 8 hours
36 volt / 25 amp
Passive
Paper bag
1 Micron
220 square inches
150 cubic Inches
70 cfm
1/2 hp
0 -4 mph
0 -2 mph
35,248 sq. ft./hr
24,421 sq. ft./hr
68 dBA at Driver's Position
11 degrees / 19%
Specifications
CONSTRUCTION
Frame:
Rear Axle Capacity:
Rear Wheels (non-marking):
Casters (non-marking):
Dimensions: (L x W x H):
Weight (w/ batteries):
Weight (w/out batteries):
BURNISHING SYSTEM
Pad Diameter:
Pad Motor Power/Speed (standard):
Pad Motor Power/Speed (optional):
Pad Engagement:
Pad Pressure:
Pad Pressure Settings:
BATTERY SYSTEM
Battery AH Rating:
Battery Run Time:
Charger (110v / 60 Hz / automatic):
FILTERING SYSTEM
Vacuum Description:
Filtering Material:
Filter Rating:
Size:
Filter Capacity:
Airflow Rating:
DRIVE SYSTEM
Transport Power:
Forward Speed Control:
Reverse Speed Control:
PRODUCTIVITY
Cleaning Rate/Hour (Max):
Cleaning Rate/Hour (Normal):
GENERAL
Sound Level:
Gradeability:
Manufactured By:
R.P.S. Corporation
P.O. Box 241
Racine, WI 53401
Phone: (800) 450-9824 (N. America)
Fax: (866) 632-6961
Copyright R.P.S. Corporation 2006. All rights reserved.
Since our policy is one of constant improvement, all
specifications are subject to change without notice.