Version 06.03.2020
HW CAM(V31),(V22)
RL2-MMI3G-Q3/GW
S
e
ite
11
2.5.
RL2-MMI3G-GW
– Connection to the CAN-gateway
Set the Gateway free.
Location of CAN-gateway
• A1/A3
below the steering-wheel
• A6/A7/A8
footwell passenger side below right
(A6 from 2013 middle of rear bench seat)
• Q5/Q3
footwell on the passenger side top left
• A5 (8T)
on the left side behind the glove compartment.
Disconnect the female 20pin connector of the factory harness at the
CAN Gateway and connect it to the 20pin connector of the 20-Pin PNP harness.
Connect the opposite female 20pin connector of that 20pin PNP harness
to the previously become free 20-Pin connector of the CAN Gateway.
Note: In case of difficulties with the connection of the 20pin PNP
harness;
the enclosed stripped 4pin harness
can be used for the
upper shown Gateway pin connection.
Pin diagram
4pin cable
Pin diagram
CAN-gateway
•
CAN Low
grey
Generally:
•
•
Pin 5
orange
/
grey
(Audi A6 with deviant connector:
•
•
Pin 6
orange
/
brown
)
•
CAN High
blue
Generally:
•
•
Pin 15
orange
/
green
(Audi A6 with deviant connector:
•
•
Pin 22
orange
/
blue
(Audi A6)
