R.G.V. JuiceArt Next, Instruction Manual

Page: 42 / 56

42
EN
Juic
e A
r
t N
e
x
t
Use
1 . Prepare the foods to centrifuge, cutting them, if necessary, into pieces opportunely
dimensioned to be inserted in the tray (11).
Remove seeds and stones from fruits.
2 . Connect the appliance to the mains socket, ensuring that
the mains data matches that shown on the data plate on
the appliance.
3
. Connection:
When the appliance is connected and the cover/tray (11) is correctly hooked to the cup/
separator (8), all the four buttons turn on in green for about one second and the appliance
emits a “ beep ”, then they turn off and the “
On/Off
” button blinks in red (the other buttons
are turned off).
4
. Functioning :
- During functioning, press the “ On/Off ” button for two seconds; the button stops blinking
and becomes steady red.
- Press the “
On/Off
” button; the appliance starts. The button turns on in green.
5 . Place the previously cut food into the tray
(11).
6 . To facilitate the blending operation use the
pressing device (10) to press the food without
forcing it.
7
. Check that the cap (4) is open.
Never press the food down with fingers or other tools (spoon,
fork,etc.). Always use the provided pressing device (10).
8
. Juice and pulp are automatically separated, the juice is sent into the juice collection
container/jug (2) while the pulp is sent into the pulp collection container (3). This means
that a large quantity of food can be processed without having to clean the appliance.
220-240V~
50/60Hz
10
11
L