background image

15

R-Biopharm Rhone Ltd

6.1

 Storage

  The KOBRA® CELL should be switched  off and 

  disconnected for washing and storage (Fig. 5).

  Always store the KOBRA® CELL filled with water in 

  order to keep the membrane wet.

Fig 4. Storage of KOBRA

®

 CELL

To fill the KOBRA® CELL with water:

1.   Fill a syringe with 5 - 10 ml of water and attach 
    the tip of the syringe to a pipette tip.
 
2.  Unscrew one of the storage plugs / ferrules from 
    one inlet / outlet position of the KOBRA® CELL, 
    leaving the other inlet / outlet positions sealed 
    with storage plugs or ferrules.

3.  Using the syringe with the pipette tip, insert this 
    into the empty inlet / outlet  position on the 
    KOBRA® CELL and fill the cell with water until 
    water overflows from the syringe connection.

4.  When finished, reinsert the storage plug / ferrule 
    to contain the water within the cell and keep the 
  membrane wet.

6

 KOBRA

®

 CELL Maintenance

 

Detector 

HPLC Column 

Out 

Solvent waste 

KC  # 123 

KC # 123 

Connect 
directly to the 
detector 

Dead end 
ferrule to seal 
port 

KOBRA

®

 

CELL 
waste 

Inlet

Fig 5. KOBRA

®

 CELL Switched Off for Washing and Storage

Summary of Contents for KOBRA CELL

























Reviews: