19
BA_BM_EXAKT-ELG-DC_EN_37-23.docx
7
Technical specifications
General technical specifications
Load per meter
STANDARD and option EXAKT ES: 300 kg
Option EXAKT MES: 450 kg
Roller conveyor length 1-
10 m (or customised special length)
Working height
880 mm
Height adjustment
± 60 mm via adjustable feet
Carrying roller material galvanised steel tubes
Carrying rollers
STANDARD and option EXAKT ES: Roller-Ø = 60 x 2 mm, ball bearing, axle-Ø = 15 mm
Option EXAKT MES: Roller-Ø = 89 x 3 mm, ball bearing, axle-Ø = 20 mm
Idler spacing
250 mm
Roller track width
STANDARD and option EXAKT MES: 300 / 400 / 500 mm
Option EXAKT ES: 400 / 500 mm
Usable roller width
STANDARD and option EXAKT MES: 250 / 350 / 450 mm
Option EXAKT ES: 350 / 450 mm
Maximum measuring length = track length minus 490 mm
Energy chain guide included as standard
Sliding carriage 12-fold ball bearing sliding carriage with pneumatic scissor brake
Optional exemption stroke 10 mm clearance stroke via eccentric lever (BELG-05) or pneumatic release (BELG-06)
Pneumatic connection via quick coupling (operating pressure max. 6 bar)
Drive for sliding carriage DC motor 24 V with worm gear drive
Holding force scissor brake approx. 3,000 N at 6 bar
Measuring and positioning system
Measuring system wear-free magnetic linear measuring system (magnetic tape + magnetic sensor)
Measuring accuracy ± 0.1 mm per meter
Positioning control single-axis control type P40 with E
2
Prom data memory
Positioning modes manual, single or program operation
Program memory up to max. 50 programs and 1,000 program blocks
Controls membrane keyboard
Display LCD dot matrix 120 x 80 pixels with backlighting
Protection class P40 control
unit
IP 43 (front, when installed) / IP 00 (rear)
Supply voltage 24 VDC +10 / -20%
7.1
Manufacturer
Reinhold Beck Maschinenbau GmbH
Im Grund 23
DE-72505 Krauchenwies (Germany)
Phone: +49 (0) 7576 / 962 978 - 0
Fax: +49 (0) 7576 / 962 978 - 90
Email:
Note:
Before using the unit in a way that deviates from the described
suitability (see section
5.2), it is essential to consult the manufac-
turer. Otherwise all warranty, liability and other claims for damages of
the operator against the manufacturer will be voided!