14
BA_BM_EXAKT-ELG-DC_EN_37-23.docx
5
Safety
5.1
Basic safety instructions
Roller & measuring conveyors can cause hazards if used improperly. Therefore, observe the safety instructions
listed in this chapter and the accident prevention regulations of your employer's liability insurance association!
The manufacturer accepts no liability for damage and malfunctions resulting from failure to
observe these operating instructions.
5.2
Application area and intended use
With their conformity to the Machinery Directive 2006/42/EC, the roller & measuring conveyors of the EXAKT
series are suitable as technical aids for operational/commercial applications.
Improper use may endanger persons and lead to a defect or damage. and to a defect or
damage of the roller & measuring conveyor.
The roller & measuring conveyor is primarily intended for operation in covered indoor areas.
The roller & measuring conveyor is suitable for transporting workpieces to a specific holding position be-
fore machining.
Work on the roller & measuring conveyor may only be carried out in sufficiently illuminated working areas.
The maximum load capacity (section
) of the roller & measuring conveyor must not be exceeded.
The roller & measuring conveyor may only be operated on horizontal floors.
The roller & measuring conveyor is not intended for moving and transporting persons.
The roller & measuring conveyor must not be operated in potentially explosive working areas.
Any other use is considered improper and is prohibited.
5.3
Improper use
Improper use is when the roller & measuring conveyor is used for purposes other than those prescribed in this
operating manual and in section
5.2, for example
use and application for private or non-commercial purposes,
use in disregard of the regulations in the operating manual,
use after unauthorized conversions or modifications,
exceeding the maximum permissible load (refer to section
7),
non-compliance with the permissible workpiece dimensions,
transporting persons or stepping on the roller & measuring conveyor
or feeding or pulling of workpieces.
In case of improper use of the roller & measuring conveyor, any warranty, liability and other claims for damages
of the operator against the manufacturer are excluded!