13
BA_BM_EXAKT-ELG-DC_EN_37-23.docx
4.4
Requirements for the operators
The operator is responsible for the safe use of the roller & measuring conveyor!
The roller & measuring conveyor may only be operated by trained personnel who have also read this
manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.
4.5
Accident prevention
To avoid accidents, the following rules must be observed for operation:
Prevent unauthorised persons from having access to the roller & measuring conveyor.
Keep unauthorized persons away from the danger areas.
Repeatedly inform other persons present about existing residual risks (see
5.8).
Conduct recurring training and instructions for persons who have to be in the area of the roller & measur-
ing conveyor, which are also recorded.
New employees must be trained internally for working on a roller & measuring conveyor and this training
must be documented.
It is forbidden to enter the roller & measuring conveyor or to climb or sit on the roller & measuring con-
veyor.
4.6
General safety regulations
In general, the following safety regulations and obligations apply when handling the roller & measuring conveyor:
The roller & measuring conveyor may only be operated when in perfect working order.
It is prohibited to remove, modify, bypass or bypass any protective, safety or monitoring device.
Defective or missing safety devices must be repaired resp. replaced immediately by authorised qualified
personnel! The roller & measuring conveyor must not be operated during this time!
It is forbidden to modify or change the roller & measuring conveyor without the written approval of the
manufacturer / supplier.
Malfunctions or damage must be reported to the operator immediately. In case of malfunctions, proceed
as follows: Take the roller & measuring conveyor out of operation, eliminate the cause of the malfunc-
tion, eliminate the malfunction, check the roller & measuring conveyor for safe condition and only then
put it back into operation!
Repair and maintenance work on electrical and pneumatic components may only be carried out by au-
thorised and trained personnel.
Maintenance work must be carried out and documented according to the maintenance instructions.
Only original spare parts from the roller & measuring conveyor manufacturer may be used for repairs.
Additional electronic components may only be purchased from the roller & measuring conveyor manufac-
turer.
Only instructed, trained or qualified persons may work on and with the roller & measuring conveyor.
It is not permitted to enter the roller & measuring conveyor or to transport persons.
For the operation of the roller & measuring conveyor, the respective national safety regulations for em-
ployees as well as the national safety and accident prevention regulations apply.