12
BA_BM_EXAKT-ELG-DC_EN_37-23.docx
4
General
The operating manual must be read carefully and understood before handling the roller &
measuring conveyor! If anything is unclear, please contact the manufacturer.
The automatic stop and positioning system of the EXAKT ELG/DC series has been specially developed for produc-
tion areas where absolute precision and repeatability are required. The EXAKT STANDARD model serves as the
basic roller conveyor. Optionally, the basic models EXAKT ES (optimised for wood construction) or EXAKT MES
(optimised for applications in mechanical engineering and metal construction) are also available.
Stop positioning is performed precisely and quickly via the integrated P40 positioning control, which is also
equipped with a generous program memory with up to 1,000 program blocks. The respective target and actual
values are visualised via an easy-to-read, backlit LCD display.
4.1
Features
•
300 kg load per meter roller conveyor with EXAKT STANDARD and EXAKT ES for timber construction
•
450 kg load per meter roller conveyor with the optional EXAKT MES for metal construction
•
Automatic stop positioning system with roller & measuring conveyor in closed design
•
Convenient operation via eye-level control mounted on swivel arm
•
Drive for sliding carriage via DC motor with worm gear transmission
•
Working height 880 mm (feet height adjustable by ± 60 mm)
•
Roller & measuring conveyor lengths 1 to 10 meters (special lengths are available)
•
Positioning optionally in manual, single or programme mode
•
Program memory (max. 50 programs and 1,000 program blocks)
•
Simple and fast input of target values and piece counts
•
Guide profile with toothed rack and magnetic tape measuring system
•
Absolute and incremental positioning
•
Tool thickness calculation
•
Offset measurement functions
•
Reference run
4.2
Application
The roller & measuring conveyor can be used for all work that corresponds to its intended use in section
It is suitable for fencing and transporting workpieces in order to bring them into a specific position for machining.
The roller & measuring conveyor must not be used for pushing or pulling workpieces.
•
The roller & measuring conveyor must not be used for work that does not correspond to its intended use
(refer to section
5.2).
•
The roller & measuring conveyor is intended exclusively for commercial use.
4.3
Target group and previous experience
This operating manual is intended for the operating and maintenance personnel of the roller & measuring con-
veyor. The operating personnel is to be determined by the operator and must further meet the following re-
quirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this roller & measuring conveyor, the operator must en-
sure the following measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction