Part 2: Remote Control
1 Network Connection
Before web operations, you need to connect the equipment to the internet.
Step 1. Connect the equipment with the internet correctly.
Step 2. Setup the LAN as in Part 9, Network Setup in the first part of the
reference manuals.
Step 3. When the Lan is connected, it needs to set up port mapping for public
network access.
Step 4. DDNS Application. You can apply for the DDNS at http://www.3322.
org/ or http://www.oray.com/
Step 5. DDNS Setup. Make sure to fill the right info in the Main Menu-
>System->NetService->DDNS
Note:
The device must be in the same network as the PC, if it fails to connect,
please check the device IP is working.
2. Remote Monitoring
After connecting to the network, there are two methods that can be used for
remote monitoring: they are client software and common browser.
Client software (CMS) is professional software used in multi-equipment
monitoring, which is safe, convenient and stable. It is the best choice and we
advise customers to use it. The browser comes with systems such as IE browser.
2.1 Client software
CMS software is used in a computer, and manipulates several DVR’s at the
same time.
Step 1. Please download the CMS software from our website at
http://qvissecurity.com/support/downloads.aspx
The CMS software will be found in the lower left corner of the page under the
heading LX DVR Series --- Remote viewing software
Step 2. After installing this software on your local PC, then open the operation
system as in picture 6, enter the add device interface through (System)
>(Device Manager) >(Add area/device), and enter the DVR information which
is needed following the prompts, in that way, you can manipulate any specified
equipment. The method is the same with web manipulation.
Step 3. You can add several DVR’s by repeating this operation.