Network setup through Main Menu>System>Network
(IP address) Set the IP address. Default: 192.168.1.10.
(Subnet Mask) Set the subnet mask code. Default: 255.255.255.0.
(Gateway) Set the default gateway. Default: 192.168.1.1.
Enter the equipment’s IP address and the router in the same network segment.
For example, if the router IP address is 192.168.1.1, and the subnet mask is
255.255.255.0. According to the default setup, generally the default gateway
is the router IP address, so if you enter the IP address 192.168.1.10 in the IE
browser to achieve visiting LAN equipment such as operating image surveillance
in the public network remote access equipment for monitoring.
Detail setup refers to “Network setup reference”.
10 Alarm Setup
Picture 6, Motion Detection
Motion detection setup. Set the DVR equipment to making it alarm, linked
recording and make the PTZ turn to a preset position where there is a moving
object in a designated areas during Monday to Friday.
Step 1. Choose (Main Menu) > (Alarm) > (Motion Detection), then enter the
setup interface;
Step 2. Choose one channel and adjust the sensitivity level, then set the time
period of the alarm surveillance. Set the monitor area (click the “set” button,
choose the areas you want, and the “default” means choose all areas, then right
click to choose “up window”.
Step 3. When in the alarm state, the DVR can show linked measures. Alarm
output, recording, tour, PTZ activation, snapshot, show message, sending email
and buzzer.
Step 4. Set the other channels alarm parameters following steps 2 and 3.
Note:
video block, video loss and alarm input’s setup method are similar with
motion detection.
