WWW.DUALSIG.COM
37
(
EMAIL setup
)
If the alarm is turned on or the alarm linkage photos are taken, the system can
send an email of the alarm information and the photos to an appointed address.
Picture 4.21 EMAIL
SMTP server
: Email server address. This could be an IP address or a domain
name. A domain name can only be used if it has the correct DNS coniguration.
Por
t: Email server port number.
SSL
: Decide whether to use Secure Socket Layer protocol to login.
User Name
: Apply the email server user name.
Password
: Input the user password.
Sender
: Set the senders email address.
Receive
r: Send the email to the appointed receiver(s) when the alarm is turned
on. You can set up to three receivers.
Title
: You can set this as you wish.
(
IP Filter setup
)
When choosing from the white list, only those IP addresses listed can connect to
the DVR. Up to 64 IP addresses are supported in this white list.
When choosing from the black list, only these listed IP addresses cannot connect
to the DVR. Up to 64 IP addresses are supported in this black list.
You can delete the set IP address by √ in the options.
Note
: When the same IP address is in the white and black list at the same time,
the black list takes precedence.
Picture 4.22 IP IP FILTER
WWW.DUALSIG.COM
