WWW.DUALSIG.COM
27
(
PreRecord
) Record 1-30 seconds before the action. (time length is decided by
the code stream)
(
Record mode
) Set the video state: schedule, manual or stop.
Schedule
: Record according to the set video type (common, detection and alarm)
and time section.
Manual
: Click the button and the relevant channel will start recording no matter
what else the channel has been set to do.
Stop
: Click the stop button and the relevant channel stops recording no matter
what else the channel has been set to do.
(
Period
) Set the time section for common recording, The recording will start only
within the set range.
(
Record type
) Set recording type: regular, detection or alarm.
Regular
: Perform regular recording in the set time section. The video ile type is
“R”.
Detect
: Trigger the “motion detect”, “camera mask” or “video loss” signal. When
the above alarm is set as the opening recording, the “detection recording” state
is on. The video ile type is “M”.
Alarm
: This triggers the external alarm signal in the set time section. When the
above alarm is set as the opening recording, the “detection recording” state is set
to on. The video ile type is “A”.
Note: Refer to chapter 4.3 to set corresponding alarm function.
4.2.2 Playback
Refer to chapter 3.5.2.
4.2.3 Snapshot Storage
Setup snapshot parameters for different channels.At irst time it's set for 24hours
snapshot continuously, pls go to Main Menu->Record->Snapshot Storage for
appropriate settings.
Note: If normal snapshot storage,pls setup Snap at Main Menu->Advanced-
>Snapshot (pls refer to chapter 4.5.1 HDD Manage)
Picture 4.2
(
Channel
) Select the related channel to set,click "all" to set all channels.
(
Presnap
) Setup presnap picture quantity before recording, default is 5 pieces.
(
Record
) Set record status,"Schedule","Manual" and "Stop"
Schedule:
Will take a snapshot according to the record type setting (regular,
detect and alarm) and time setting period.
WWW.DUALSIG.COM
