WWW.DUALSIG.COM
29
Remove
: Clear the ile information.
Add
: Show the ile information to satisfy the set ile attributes.
Start/pause
: Click the play button to start the backup and click the pause button
to stop the backup.
Cancel
: During backup you can exit the page layout to carry out other functions.
4.3 Alarm Function
Alarm functions include: motion detect, video blind, video loss, alarm input and
alarm output.
4.3.1 Motion Detect
When the system detects a motion signal that reaches the set level of sensitivity,
the motion detect alarm is switched on and the linkage function is turned on.
Picture 4.4 Motion Detect
(
Channel
) Choose the set motion detect channel.
(
Enable
)
means that the motion detect function is on.
(
Sensitivity
) Choose in the six options according to the sensitivity.
(
Region
) Click setup and enter the set area. The area is divided into PAL 8x8.
Green block means the current cursor area. Yellow block means the dynamic
detect defensive area. Black block means the unfenced area. You can set the area
as followed, Drag the mouse and draw the area.
Picture 4.5 Region
WWW.DUALSIG.COM
