FAN WILL NOT START
1.
Check that the electricity has been
turned on at the circuit breaker which had
probably been turned off during
installation.
2.
Turn off the electricity. Check all
connections in the wiring of the fan at the
wall and make sure it follows the wiring
instructions outlined in this manual.
NOISE
Note:
Always allow a day or two "run-in"
time for any new fan at medium or high
speed. When attempting to diagnose
noise, listen carefully from several sides
to try and isolate the location of the noise
(fan base, blade, fan cage, motor, etc.)
1.
Check to see that all screws are tight in
the fan cage connection to the motor face
plate.
2.
Turn off the power. Loosen the fan
base and check that the wiring and/or wire
nut connectors are not resting against the
fan base, possibly vibrating while the fan
is on.
3.
Use of a standard light rheostat or an
unapproved fan wall control to control the
fan speed will always cause an annoying
"hum". Many fan motors do not work
quietly with solid state variable speed
controls.
7. TROUBLESHOOTING
REPLACEMENT PARTS AVAILABLE
A full range of genuine replacement
spare parts are available at reasonable
cost directly form Quorum
International. Please call us at (817)
626-5483. Monday through Friday
from 8:00 A.M. to 5:00 P.M. CST.
