Model #92413-xx: 14.08 lbs
1. Fan motor assembly (a)
2. Wall mounting plate, bundled wires, wall mounting plate
screws (b)
3. Wall switch, 2 mounting screws and 3 wire nuts, wall plate
w/2 mounting screws and 2 machine screws ( c )
Unpack your fan and check the contents. Do not discard the carton. If warranty
replacement or repair is ever necessary the fan should be returned in original packaging.
Remove all parts and hardware. Do not lay motor housing on its side - because the
decorative casing may shift. Check all visible screws, bolts and nuts for tightness.
Examine all parts. The following parts should be included:
2. UNPACKING YOUR FAN
NOTE:
Some Quorum fan models will have slightly
different parts than what is shown here
depending upon the design you have chosen.
Basic installation procedures are similar for
all models.
IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL QUORUM DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY.
1.
To avoid possible electric shock, turn
off the electricity at the main fuse box or
circuit panel before you begin the fan
installation or before servicing the fan or
installing accessories.
2.
Read all instructions and safety
information carefully before installing
your fan and save these instructions.
3.
Make sure all electrical connections
comply with local codes or ordinances as
well as the National Electrical Code. If
you are unfamiliar with electric wiring,
please use a qualified and licensed
electrician.
4.
When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
5.
Before applying power, visually
re-inspect the installation. Make sure that
all guards and protective devices are
securely in place and all visible screws
and bolts are tightened. All set-screws
must be retightened before installation.
6.
The wall outlet box must be securely
mounted, and
capable of supporting at
least 50 pounds.
To reduce the risk of
fire, electric shock, or personal injury, use
only an outlet box clearly labeled
"Acceptable For Fan Support".
7.
To reduce the risk of personal injury, do
not bend blades or any other part of fan
when cleaning. Do not insert foreign
objects in between rotating fan blades or
in pace surrounding entire rotating fan
unit. Fan must be turned off at power at
supply source before installation, cleaning
or servicing.
8.
To reduce the risk of personal injury,
install the supplementary mounting means
and use only the hardware provided with
the fan.
9.
After installation is complete, check
that all connections are absolutely secure.
10.
Do not attempt to control the
operation of the fan from any wall control
that is not approved by Quorum for use
with its fans. Do not use solid state wall
controls. The use of any unapproved
control voids the fan’s warranty.
1. SAFETY RULES
TOOLS REQUIRED
FOR INSTALLAITON
Phillips Screwdriver
Wire Cutters
Electrical Tape
Step Ladder
c.
a.
b.
Rotation
