37
---------------------------
F: 1v-WE
P: QC061010
C: CONCERTO
RAM: 8192K
SERIAL#: 1234567
MAC: 00 16 4B 00 01 0D
---------------------------
key table. The register will recognize the entry as a scan code when MORE then 5 digits are
entered. Normal key codes have a value of maximal 5 digits. This means that when you want the
program a PLU with scan code “123” you MUST enter “000123”. Suppose this PLU is located at
record number 5 the register will put 10005 as key code which is also shown on the display. When
you enter “123” the register will program key code “123”.
USING PLU’S WITH SCANCODES IN COMBINATION WITH BALANCES
On the Balance the Index Number of the PLU is stored so at the moment it is NOT ALLOWED to
create or delete PLU when there are still balances open because the sequence of the index file will
be changed which will result in wrong PLU on invoices.
10.5 Program Version and Test Routines
The POS Concerto / QTouch
2
have a set of test routines
built-in to check certain hardware components and receive
information about the installed drivers and software
version.
Enter the test number in mode P and confirm with the key
“TYPE”. Please note the programming of the system keys.
By default the “TYPE” key is located on the key “PLU”.
The following test routines are available:
302
Display Test
305
Print out Program Version
306
Init printer
400
Transaction Test Direct Sale
401
Transaction Test Tables
Example: Print out the actual software version (only in P mode):
PLU
TYPE
5
0
3
