1
2
B
3
3
4
1 Fit hoses
Fit the hot, cold and mixer water hose
to the tap.
2 Tap through
work top
Push the tap through the hole in the
work top.
3 Tighten the
brass plate
Place the metal washer and threaded
ring around the hoses. Adjust the
position of the tap to ensure that the
Quooker logo is facing the user and
fully tighten the metal washer.
4 Securing tap
screws
Tighten the threaded ring and secure
it with the two screws provided.
Fitting Flex tap
• When installing the tank it is necessary to take into account that the Flex tap
coupling must be able to move up and down freely. When the hose is not
withdrawn it hangs approximately 40 cm below the work surface.
• Note: When fitting the tap to a thin work top use the white tap support
before placing the metal washer and threaded ring around the hoses.
Installatieinstr VAQ E UK 30.225.03.V15 11-12-18 09:32 Pagina 14
