1 Tap through
work top
When fitting the tap in a 35 mm hole
or larger, first attach the black plastic
centring ring to the base of the tap to
centre the tap in the hole.
2 Securing the
tap
Set the tap to the desired position
and secure it with the metal washer
and threaded ring supplied.
3 Securing tap
screws
Tighten the threaded ring and secure
it with the two screws provided.
1
2
Fitting Nordic single tap
• Note: The total length of the hose between the single tap and tank is only 70
cm. The tank must therefore be fitted close to the tap. Extension hoses are
available in different lengths but are not normally required.
• Note: The small fibre washers supplied with the tap rings are not required
yet at this point. One will be used for connecting the tap and tank hose (see
section E), the second one is a spare.
B
1
3
Installatieinstr VAQ E UK 30.225.03.V15 11-12-18 09:32 Pagina 12
