A
A
B
In
Out
A
B
In
Out
1 Connecting the
T-valve
Shut off the main water supply.
Disconnect the Fusion or Flex cold
water supply hose. Connect the
T-valve to the cold water supply using
the supplied hose screen. Reconnect
the Fusion or Flex cold water supply
hose to the T-valve using another of
the supplied hose screens and push
the plastic tube (A) firmly into the
T-valve.
2 Connecting the
bracket
Push plastic tube (A) firmly into the
inlet marked “IN” on the bracket.
Push the second plastic tube (B) firmly
into the outlet marked “OUT” on the
bracket.
Optional
Use the elbow 3/8
"
when a sharp bend
is desired.
1
2
Connecting water
•
When fitting the Cold Water Filter to an existing Quooker, switch off
the Quooker by pressing the ‘Q’ button at the top of the tank and
then unplug it from the socket.
•
Please note: The plastic tubes will be connected to push fittings.
No extra sealants are required. The plastic tubes should be installed
without tension and sharp bends.
•
When connecting the metal hoses, only the supplied washer or hose
screen should be used. Do not use any liquid sealants.
B
