B
Connecting with tank
• Important: Let the tap hose cool down before disconnecting.
• The tank cover has two jack-plug ports, one for your tap LED cable and a
second covered port which will be used for the Cold Water Filter.
1 Disconnecting
tank
Disconnect tap hose from the top of
the tank using size 10 and 14 spanners.
2 Reconnect tank
using T-piece
Connect the T-piece to the tank using
size 10 and 14 spanners and the small
fibre washer supplied. Connect the
tap hose to the T-piece using the
second small fibre washer. Make sure
the tap hose does not block the jack-
plug ports on the tank.
2 Place locking
clip
Secure the T-piece using the locking
clip.
4 Electrical
connection
Remove the plastic protective cover
from the second jack-plug port provid-
ed at the back of the tank cover.
Connect the Cold Water Filter by
plugging the LED cable into the
second jack-plug port. Please note:
the supplied cable clips can be added
to route the LED cable along the
plastic tubes.
1
3
2
4
C
