Quonset Microwave QM1003-0.5-18-2, User Manual

Page: 72 / 100

QM1003-0.5-18-2 Dual Channel RF Downconverter User Manual
-178 Expression data not allowed
A legal expression data element was encountered but not allowed by the Prod-
uct.
-200 Execution error
Indicates that an execution error has occurred.
-211 Trigger ignored
Indicates that a trigger command was received but ignored because the Dual
Channel RF Downconverter was not in the wait for trigger state.
-213 Trigger ignored
Indicates that a trigger command was received but ignored because the Dual
Channel RF Downconverter was not in the wait for trigger state.
-222 Data out of range
A numeric parameter value is outside the valid range for the command.
-224 Illegal parameter value
A discrete parameter was received which was not a valid choice for the com-
mand.
-230 Data corrupt or stale
This occurs when a measurement command is attempted and either a reset has
been received of the state of the Dual Channel RF Downconverter has changed
such that the measurement is no longer valid.
-241 Hardware missing
The Dual Channel RF Downconverter is unable to execute the command be-
cause the hardware does not support that feature.
-310 System error
This error indicates a failure with the Dual Channel RF Downconverter.
-330 Self-test failed
The -330,"Self-test failed" error indicates a problem with the Dual Channel RF
Downconverter.
-350 Queue overflow
The error queue is full and another error has occurred which could not be
recorded.
-410 Query INTERRUPTED
A command was received which sends data to the output buffer, but the output
buffer contained data from a previous command. The output buffer is cleared
when power has been of or after a *RST command has been issued.
-420 Query UNTERMINATED
The Dual Channel RF Downconverter was addressed to talk but a command
has not been received which sends data to the output buffer.
Quonset Microwave Revision 1.0.0 61