Quonset Microwave QM1003-0.5-18-2, User Manual

Page: 33 / 100

QM1003-0.5-18-2 Dual Channel RF Downconverter User Manual
Program Data
’
<
inserted ’
>
’ ’
<
non ’ char
>
"
<
inserted "
>
" "
<
non " char
>
Response Data
"
<
inserted "
>
" "
<
non " char
>
1.7 Input Message Terminators
Program messages sent to a SCPI instrument must terminate with a < newline > character. The IEEE.488
EOI (end or identify) signal is interpreted as a < newline > character and may also be used to terminate a
message in place of the < newline > character. A < carriage return > followed by a < newline > character
is also accepted. Many programming languages allow you to specify a message terminator character
or EOI state to be automatically sent with each bus transaction. Message termination
always
sets the
current path back to the root-level.
1.8 Compliance Information
1.8.1 IEEE-488.2 Compliance
The Dual Channel RF Downconverter complies with the rules and regulations of the of the IEEE-488.2
standard which are applicable to USB controlled devices.
1.8.2 USBTMC Compliance
The QM1003-0.5-18-2 Dual Channel RF Downconverter complies with the rules and regulations of the of
the USBTMC (USB Test and Measurement Class). When connected to a USB bus, the QM1003-0.5-18-2
will configure as a USB Test and Measurement device.
Quonset Microwave Revision 1.0.0 22