the rudderpost and fuselage did not
fill up with epoxy. Before the epoxy
hardens, you might be able to clean
out most of the epoxy with a round
toothpick or thin piece of 1/64
plywood. The bottom hinge slots are
where the problem might occur. If
the epoxy hardens before you clean
out the hinge slots you will have a
problem. White glue could also be
used to attach the vertical fin and
clean up with water and a piece of
paper towel would be much easier.
Figure 18
Figure 19
14
Summary of Contents for Semi Scale Yak-54
Page 34: ...Figure 82 Figure 83 34 ...
