Figure 75
Figure 76
Important:
Make sure the tank is
firmly secured. Keep in mind that
with a full fuel tank, say 12 ounces,
with an airplane pulling 10 G’s
creates a force of 120 ounces or 7.5
pounds. With this much force the full
fuel tank might just like to take on a
mind of its own. Ten G’s would not
be uncommon in some violent 3-D
maneuvers, which this Yak-54 is
capable of doing certainly with the
control surface throws that you have
available.
Step 4
Install the fuel lines. Use a T fitting
between the input line and the carb.
The straight line goes to the carb
and the other line exits from the
bottom of the firewall. You are also
advised to use a filter after the T
fitting, before the carb input.
Figure 77
Figure 78
Use a commercially available plug
for the line.
32
Summary of Contents for Semi Scale Yak-54
Page 34: ...Figure 82 Figure 83 34 ...
