1-2 Introduction
MedTrack CR60 Rehabilitation Treadmill Service Manual
Components
Configuration Plate
Power
The circuit breaker on the front of the treadmill hood controls the power
to the treadmill. The circuit breaker must be set to
ON
for the treadmill to
run.
WARNING!Turn off the circuit breaker before connecting or
disconnecting the treadmill from the wall outlet.
Caution! The treadmill must be on an appropriate, dedicated
electrical circuit. Nothing else should be connected to the
circuit.
Operation
The controller is a computerized panel used to operate the treadmill. It is
mounted above the front handrail. All commands, including power, are
entered by pressing a soft-touch key on the panel. Visual indicators and
displays show the operational status and exercise results.
Controllers
MedTrack CR60 Controller Panel
Circuit Breaker
Power Cord
High voltage treadmills will have
detachable power cords.
Quinton
UP
GRADE
SPEED
POWER
DOWN
STOP BELT
START BELT
COOL
DOWN
SELECT
FASTER
SLOWER
STOP BELT
UNITS
CLEAR
