Quinton ClubTrack, Service Manual

Page: 22 / 148

Service Mode
The treadmill provides a service mode for troubleshooting the
electronics. To enter the service mode, press
Stop Belt
,
Faster
, and
Slower
simultaneously.
P000
appears in the Select display,
indicating that no key is pressed. In the ClubTrack Plus, the word
Service scrolls across the tri-color display.
To exit the service mode, press and release the same three keys
simultaneously or press
Power
twice to power up into normal
mode.
)
In service mode, the HR ClubTrack Plus screen lists the tests
described below. To perform a test, press the softkey next to
the test name, rather than pressing the indicated key
combinations.
Firmware Revision
To display the firmware revision level of the PCB assemblies:
1. Enter the service mode.
2. Simultaneously press
Stop Belt
and
Grade Up
. The controller
firmware revision level appears in the Select display.
3. Simultaneously press
Stop Belt
and
Grade Down
. The VSD
revision level appears in the Select display.
Controller Keys
To test the keys on the key panel:
1. Enter the service mode. If a key has shorted out,
P555
appears
in the Select display.
2. Using the table below, press each key in succession to display the
appropriate code in the Select display (the HR ClubTrack Plus
displays text instead of code).
P000
should reappear when you
release each key.
Key Code
No key pressed P000
Shorted Key(s) P555
Clear P001
Up P002
Down P003
Stop Belt P004
Input +P005
Input
-
P006
Enter P007
Select P007
Next Stage* P008
Start Belt P009
Troubleshooting 3-5