Parts List
Warnings
Assembly
Care & Maintenance
Contents
Replaceable Parts
Warranty
To Use
Contents
Assembly
To Use
Install Infant Car Seat
7
To avoid serious injury:
• Use
ONLY
Maxi-Cosi Mico
®
, Mico
®
AP, Mico
®
Nxt and Prezi
TM
infant car seat and Quinny tukk™
foldable carrier with adapters included with this
stroller.
• Please refer to the manufacturer’s instructions for
the use of your infant car seat and bassinet.
•
ALWAYS
install car seat and bassinet facing the
stroller handlebar.
•
ALWAYS
use the restraint system in the car
seat.
WARNING
17a
17
Align Slots
17
Install Maxi-Cosi Mico
®
, Mico
®
AP, Mico
®
Nxt and Prezi
TM
Infant Car Seats or Quinny tukk
TM
foldable carrier
Push the parking brake pedal down. Remove the seat.
Locate the buttons inside each hub on both sides of stroller frame.
Depress the button and rotate the hubs so that the two slots on top
are aligned
(Figure 17)
. Be sure that the hubs are in the upright position,
otherwise the adapters will not fit.
Insert the adapter labeled “R” into the frame hub labeled “R” until you
hear a “click.” Then insert the adapter labeled “L” into the frame hub
labeled “L” until you hear a “click”
(Figure 17a)
.
Car seat and carrier must be positioned so that
child faces the stroller handle.
Lower car seat or bassinet into adapters until both sides “click”
(Figure 17b, 17c)
.
Pull up on car seat or foldable carrier to ensure that it is locked into place.
To remove Mico, Mico AP, Mico Nxt car seat,
press both buttons on car
seat while lifting car seat up
(Figure 17d)
.
To remove Prezi car seat,
pull
grey release button on back of car seat while lifting up
(Figure 17e)
.
To
remove tukk,
press both release buttons (one on each side of carrier) then
pull up on the carrier
(Figure 17f)
.
To remove car seat adapters, press release button and slide adapter off the
frame hubs
(Figure 17g)
.
17g
17b
Tukk Carrier
Car Seat
Tukk Carrier
17f
17c
2x
17d
17e
Mico, Mico AP,
Mico Nxt Car
Seats
Prezi Car Seat
