16
Seat Adjustments
The seating on your scooter can be adjusted to various positions for your comfort. The
service engineer will set these adjustments up for you but you will be required to adjust it
yourself, especially when folding the Flyte ready to transport into your car.
REMOVE THE IGNITION KEY BEFORE ADJUSTING ANYTHING
Seat Slider:
Allows the seat to be adjusted forwards and backwards. Pull the lever
upwards and adjust the seat to suit. Release the lever and move the seat slightly back and
forth until you hear the seat lock. Always keep the seat as far forward as possible as this
aids the stability of the scooter.
IMPORTANT INFORMATION:
When you are preparing to ‘Load’ the Flyte into your car
and before starting the seat folding process you need to make sure the seat is in the rear
position (furthest from the tiller) to ensure the Flyte folds down to it’s most compact
position.
To adjust the width of the
armrests loosen the clamps.
Adjust the arms in or out to suit
your requirements then retighten.
Armrest Removal
To remove the armrests
completely loosen the clamps
(circled) then pull outwards until
the armrest is free. If it will not
separate loosen the clamp further.
IMPORTANT- Check that these
clamps are tight every day
before driving the vehicle