ENGLISH
Cod. 2200780133 00 - Edition 10/2014 - 13
17.1
TROUBLE-SHOOTING AND EMERGENCY REMEDIES
N.B. OPERATIONS MARKED
MUST BE CARRIED OUT BY PROFESSIONALLY SKILLED PERSONNEL APPROVED THE
MANUFACTURER
DISPLAY
FLASHING WARNING
NOTES
Possible root causes
Observations
Dryer is working OK
n/a
Warning icon NOT
fashing, label P1 flashing
Fan control probe failed
replace probe
Warning icon NOT
fashing, label H1 flashing High PDP call for service
refrigerant leak
flow rate / inlet
temperature
exeeding the limit.
Warning icon NOT
fashing, label L1 flashing Low PDP call for service
hot gas by pass
valve out of order.
ambient temperature
lower then limits
EE ALARM
EE alarm is shown when internal EPROM errors happens, if this warning will appear, the dryer will stop running. The error can be reset by pressing
one of the four buttons of the controller, anyway please replace the controller itself.
NOTE: In case of EE alarm please contact your tech support.
