Section VII - Adjustments and servicing procedures
88
Quincy Compressor
Dryer maintenance
(only applicable to compressors with refrigerant dryer)
Safety precautions
The dryer circuit contains refrigerant.
When handling refrigerant, all applicable Safety
precautions during maintenance or repair must be observed. Specifically be aware of
following points:
• Contact of liquid refrigerant with the skin can cause freezing. Wear special gloves.
If contacted with the skin, the skin should be rinsed with water. On no account may
clothing be removed.
• Fluid refrigerant can also cause freezing of the eyes. Wear safety glasses.
• Avoid inhalation of refrigerant vapors. Check that the working area is adequately
ventilated.
Be aware that internal components of the dryer such as the pipes can reach a
temperature of up to 110˚C (230˚F). Therefore, wait until the dryer has cooled down
before removing the side panels.
Before starting any maintenance or repair work, switch off the voltage and close the air
outlet valve.
Local legislation may stipulate that:
• Work on the refrigerant circuit of the cooling dryer or on any equipment which
influences its function must be undertaken by an authorized control body.
• The installation should be checked once a year by an authorized control body.
General
The following remarks should be kept in mind:
• Keep the dryer clean.
• Brush or blow off the finned surface of condenser regularly.
Device settings
The regulating and safety devices are factory adjusted to obtain optimum performance
of the dryer. Do not alter the setting of any of the devices.
CAUTION!
Connecting pressure measuring devices in the refrigerant circuit can change the
amount of refrigerant in the system. This results in a less optimal working of the dryer.
