QHPR Installation & Operating Instructions
Safety Precautions
Pressurized Devices
This equipment is a pressure containing
device.
• Do not exceed maximum operating
pressure as shown on equipment serial
number tag.
• Make sure equipment is depressurized
before working on or disassembling it
for service.
Electrical
This equipment requires electricity to
operate.
• Install equipment in compliance with all
applicable electrical codes.
• Standard equipment is supplied with
electrical enclosures not intended for
installation in hazardous environments.
• Disconnect power supply to equipment
when performing any electrical service
work.
Breathing Air
• Air treated by this equipment may not
be suitable for breathing without further
purification.
Refer to applicable standards and
specifications for the requirements for
breathing quality air.
Receiving, Unpacking and Moving
Receiving
This shipment has been thoroughly
checked, packed and inspected before
leaving our plant. It was received in
good condition by the carrier and was so
acknowledged.
Check for visible loss or damage. If
this shipment shows evidence of loss or
damage at time of delivery to you, insist
that a notation of this loss or damage
be made on the delivery receipt by the
carrier’s agent.
Unpacking
Check for Concealed Loss or Damage.
When a shipment has been delivered to
you in apparent good order, but concealed
damage is found upon unpacking, notify
the carrier immediately and insist on his
agent inspecting the shipment. Concealed
damage claims are not our responsibility as
our terms are F.O.B. point of shipment.
Moving
In moving or transporting dryer, do not tip
dryer onto its side.
Storage
IMPORTANT: Do not store dryer in
temperatures above 130°F (54.4°C).
Quincy Compressor-QHPR Series Dryers
