background image

Quincy Compressor

1312100602, September 2012 

3501 Wisman Lane, Quincy IL - 62305-3116

TABLE OF CONTENTS

SAFETY ....................................................................1
DESCRIPTION & APPLICATION .............................2
INSTALLATION .........................................................2
SYSTEM COMPONENTS .........................................4
PRE-STARTING CHECKLIST ..................................6
STARTING & STOPPING THE COMPRESSOR ......6
MAINTENANCE ........................................................6
TROUBLESHOOTING ..............................................9
COMPRESSOR UNIT PARTS ................................13
DECALS & DIMENSIONS ......................................15

SAFETY

“ D A N G E R ! ”,   “ WA R N I N G ! ”,   a n d  “ C AU T I O N ! ”  

are displayed in large bold capital letters to call 

attention to areas of vital concern. They represent 

different degrees of hazard seriousness, as stated by 

the following:

DANGER !

Immediate hazards which will re sult in severe per-
sonal injury or death.

WARNING !

Hazards or unsafe practices that could result in 
personal injury or death.

CAUTION !

Hazards or unsafe practices which could result in 
minor personal in 

jury, product or property dam-

age. 

 WARRANTY

Quincy Compressor Reciprocating Products 

                 

 Single Stage Compressors

What does this warranty cover?

Quincy Compressor (the Company) warrants this compressor to be free from defects in materials and workmanship for a period of one 

year from date of purchase.

What are the Company's obligations under this warranty?

In the event this compressor proves to be defective during the warranty period, the Company will, at its sole option, either repair or 

replace this compressor.  The Company and its authorized agents may use, at their discretion, reconditioned units when undertaking 

such repairs or replacement.  Repaired or replacement units shall be warranted hereunder for the remainder of the warranty period 

applicable to the original compressor, or ninety (90) days, whichever is greater.

How do you get service?

Contact your local Quincy distributor, or call the Company's Service department at (217) 222-7700, for directions to the nearest autho-

rized warranty repair center.  In order for you to be eligible to utilize this warranty, Company must have received a completed warranty 

registration card within thirty (30) days of your purchase of this compressor or, at the time service is requested, you must be prepared 

to provide proof of purchase in the form of a receipt or invoice.  All moving, shipping and insurance charges incurred by you to deliver 

this compressor to the nearest authorized warranty repair center shall be paid by you and shall be your exclusive responsibility.  All 

risk of loss or damage to your compressor in transit shall remain with you until such time as Company or its authorized agents take 

receipt of your compressor.

What does this warranty not cover?

This warranty is contigent upon proper use of the compressor by purchaser and does not cover:

(A) Abnormal conditions, accident, neglect, misuse or improper storage of the unit.
(B) Deviation from operating or maintenance instructions.
(C) Modifications not authorized by the Company.
(D) Repairs or maintenance (other than routine air tank draining and air filter changes required by your operating and maintenance 

manual) made by persons other than Company or its authorized agents.

What are the limits of Company's Liability?

The warranty given herein, together with any implied warranties covering this compressor, including warranties of merchantability or 

fitness for a particular purpose are limited in duration to one year from the date of purchase, and no warranties, whether express or 

implied will apply after this period.  Some states and provinces do not allow limitations on how long an implied warranty lasts, so the 

above limitations may not apply to you.

If this compressor is not in good working order as warranted above, your sole remedy shall be repair or replacement as provided above.  

In no event will Company be liable to you for any damages, including any lost profits, lost savings or other incidental or consequential 

damages arising out of the use or inability to use such compressor, even if Company or your place of purchase has been advised of the 

possibility of such damages.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

Summary of Contents for Q12120P



















Reviews: