Quincy Compressor
1312100602, September 2012
11
3501 Wisman Lane, Quincy IL - 62305-3116
1. Turn unit off, unplug it, &
tighten or replace fittings or
components.
2. Replace faulty check valve.
1. Loose connection or leak (pipe,
tank drain valve, tubing, fit-
ting or hose).
2. Faulty check valve.
12. Tank loses pressure rapidly
when compressor shuts off.
1. Check for leaks or restrictions
in hose or piping. Repair.
2. Clean or replace filter.
3. Tighten belt (refer to Belt
Align ment & Adjustment).
4. Replace with larger hose or
connec tors.
5. Either use a smaller tool or a
larger compressor.
6. Turn the regulator to the
proper set ting / replace faulty
regulator.
1. Leaks or restrictions.
2. Restricted air intake (filter
plugged).
3. Slipping belt.
4. Hose or hose connectors too
small.
5. Compressor incorrectly sized.
6. Regulator not turned up to
high enough pressure / faulty
regulator.
11. Insufficient pressure at tool or
acces sory.
1. Contact qualified electrician.
1. Reversed wiring polarity.
10. Compressor runs backwards.
1. Change lubricant. Move
compressor or air inlet to less
humid atmosphere.
1. Water in lubricant due to
humidity or condensation.
9. Crankcase lubricant is milky.
1. Take to Authorized Service
Center.
1. Damaged inlet (reed) valve.
8. Air blowing from inlet filter.
1. Drain lubricant. Refill to
proper level with proper lubri-
cant (refer to Lubrication).
2. Tighten bolts on compressor
to proper torque or replace
gaskets.
3. Take to Authorized Service
Center.
4. Drain lubricant & refill with
proper lubricant (refer to Lu-
brication).
5. Level compressor.
6. Take to Authorized Service
Center.
7. Clean or replace crankcase
breather.
1. Crankcase overfilled with
lubricant.
2. Lubricant leaks.
3. Worn piston rings.
4. Wrong lubricant viscosity.
5. Compressor on unlevel sur-
face.
6. Scored cylinder.
7. Plugged crankcase breather.
7. Excessive lubricant consump-
tion and/or ex cessive lubricant
in hose.
PROBLEM
CAUSES
CORRECTION