9
Notes for use with SKY boxes
The procedure when using a SKY receiver is broadly the
same with a few things to note:
1.
Connect the F-type connector on the dual cable (Item C) from
the satellite dish to the
LNB input
on your SKY box.
2.
You must ensure your SKY box has a channel list before use, if
the box has not been used for a while it may have lost its
channel list. We recommend checking this before leaving home.
If you do not have a channel list then you should connect the
box to an already aligned dish and run a channel search.
3.
Due to encryption used by sky it is better to move the dish in
staggered movements (at step 10), pausing for a few seconds
every degree to allow time for the signal to decode.
For SKY receivers make sure your receiver has a current channel list before use
Notes for use with TVs with an integrated receiver
(eg. Falcon Travel TV, Cello Traveller and Avtex DRS range)
The procedure for a TV with an integrated receiver is exactly the
same as for a separate receiver, just connect the F-type connector to
your TVs LNB/Antenna input and select the correct input on your TV,
this may be called Satellite, DVB-S, STV or ATV. Refer to your TV
instruction manual for more details.
