7
Power up and tuning:
1)
Switch on your TV and satellite receiver
2)
Using your TV remote control select the relevant
HDMI, SCART or AV
input
(depending on the connection used) to view the receiver menu or select the
satellite input if using a TV with integrated receiver
3) You should now see a 'no signal' or
-
'bad signal' message
4) Using the receivers remote (or TV remote if using a TV
with integrated receiver
) select BBC 1
(just press the 1 button if using the optional receiver, for other receivers/TVs refer to its
own user manual for instructions). The screen will return to the 'No signal' message after a
few seconds. You are now ready for the next part of
the tuning process.
Note:
The optional receiver is pre-tuned to Astra 28 for UK TV, for other satellites
and channels please see the receiver user guide
Note:
If you are using your own receiver or a TV with integrated receiver you should
make sure that it has a channel list before use, if it does not then you should follow
the procedure to update the channels while it is connected to a pre-aligned dish.
5) If using the optional receiver use the remote control to increase the volume to full
6) Using the TV
remote increase the volume to full
You are now ready to
start the alignment of
your dish
7) With the dish face starting at vertical slowly tilt the top of dish
back until the correct Elevation for your camping location reads
on the Elevation meter as demonstrated (Fig 1 )
You can get the correct elevation and skew for your location by
visiting our website at
www.quicksatuk.com/elevation
or an
app on your smartphone such as Dishpointer or Sat Finder.
Fig 1
