4
Dish Setup:
1)
Loosen the fixing clamp on the tripod stand and push the legs downwards.
2)
Extend the feet of the tripod stand as far as they will
go
for maximum stability
3)
Ideally the
tripod should be placed on reasonably level ground so that the tripod is vertical ,
use the ground
anchor pegs to secure the tripod
so that it isn’t accidentally moved or blown over by the wind.
4) Using the Sat Mat and compass (Item F) align one of the tripod legs
so that it is in the direction of the blue arrow on the mat
(FIG 2) and
follow the instructions on the Sat Mat.
5)
Position and secure the dish to the tripod using the thumbwheel.
6)
Once the dish is secured on the tripod it should look like the image
(FIG 3) Do not overtighten the thumbwheel at this point as rotation will
be required for the final step in tuning
Do not connect any leads until your satellite dish is firmly on the tripod
FIG 3
Sat Mat
FIG 2
