6
Connecting your TV or receiver:
NOTE: These instructions show the optional QuickSAT receiver (Item J) but the procedure will be very similar
for other FREESAT and SKY set top receivers.
This section takes you through connecting the optional receiver.
Connect the receiver to the TV using the SCART adapter and/or RCA lead
(SD receiver) or HDMI cable (HD receiver). Images 1 & 2 below show the
SD receiver connected using the SCART adapter.
Image 1
Image 2
Connect the F-type connector on the dual cable (Item C) from the satellite
dish to the threaded
LNB Input
socket on the receiver (or LNB input on a
TV with integrated receiver)
Locate the headphone socket on your TV and plug in the 3.5mm jack plug
from the dual cable (Item C) into it
Connect the receiver to the power supply and position close to the TV.
Please ensure all equipment is switched off before
connecting/disconnecting any cables
If using the optional receiver plug the remote eye (Item K) into the receiver
(Item J) and position the eye on the front of the TV using the supplied
adhesive pad
