SALSA/SALSA M
77
Rev.5.0
Model: Quickie Salsa M (MWD)
Maximum occupant mass
(test dummy mass):
140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and
test methods for static,
impact and fatigue
strengths
(ISO 7176-8)
b) power and
control systems for
electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in
accordance with ISO
7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is
specified as a Class B
power chair
ISO7176-15
Min.
Max.
Comments
Overall length (with legrest)
-
1150 mm
with 70° hanger
Overall width
600 mm
660 mm
max. width with seat width adjusted
to 51 cm
Total mass (w. batteries)
113 kg
145 kg
Mass of the heaviest part
-
98 kg
Chair with all no tool removal parts
taken off
Static stability downhill
-
17°
worst case 41 cm deep seat, 0° tilt,
-4° recline
Static stability uphill
-
9.5°
worst case 51 cm deep seat, 29°
tilt, 16° recline
Static stability sideways
-
13.9°
worst case 41 cm deep seat, 0° tilt,
0° recline
Energy consumption (max. range)
-
26 km
Dynamic stability uphill
8 °
9° tilt/16° recline &max. seat height
(not with balle)
Obstacle climbing (with kerb climber)
75 mm
Forward with 6 kph motors
Max. speed forward
6 kph
10 kph
10 kph only with 10 kph motor op-
tion
Min. brake distance from max. speed
1.0 m
1.2 m
1 m for 6 kph motor, 1.2 m for 10
kph motor
Seat plane angle
-5°
30°
-5° only with MBL tilt + additional
brackets
Effective seat depth
406 mm
508 mm
Effective seat width
394 mm
496 mm
Seat surface height at front edge
470 mm
-
set 0° tilt, lowest seat height and no
modules
Backrest angle
-4°
16°
adjustable in 4° steps with tools
Backrest height
400 mm
500 mm
Footrest to seat distance
335 mm
610 mm
with 70° hanger
Leg to seat surface angle
110°
-
with 70° hanger
Armrest to seat distance
245 mm
-
adjustable with tools
Front location of armrest structure
310 mm
420 mm
Min. turning radius
670 mm
-
with 70° hanger
Nominal battery voltage
-
24V
Battery cut-off voltage
-
16V
for 255 seconds
Battery fusible links
-
-
150A in line fuse on each battery
Quickie Direct Actuator Control Box
fusible link
-
-
15A blade fuse located on AUX
supply of power loom
Mass of the test dummy
-
140 kg
EN 12184
Min.
Max.
Comments
Max. kerb height
-
75 mm
Ground clearance
-
40 mm
Turning diameter
1000 mm
1150 mm
Speed control operation force
-
2.2N R-Net
2.4N VR2
Direction control operation force
-
1.7N R-Net
1.9N VR2
NOTE:
Salsa M is also
manufactured in the UK:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
