SALSA/SALSA M
63
Rev.5.0
12.2 Occupant restraint instructions
WARNINGS!
The pelvic restraint belt must be worn low across the
•
front of the pelvis (Fig 12.2) so that the angle of the
pelvic belt is within the preferred zone of 30° to 75° to
the horizontal, (Fig 12.3).
A steeper (greater) angle within the preferred zone is
•
desirable i.e. closer to, but never exceeding 75°.
Restraint belts must not be held away from the body by
•
wheelchair components or parts such as the armrests
or wheels, (Fig 12.4).
The upper torso restraint belt must fit over the shoulder
•
and across the chest as illustrated, (Fig 12.5).
Restraint belts must be adjusted as tightly as possible
•
consistent with user comfort.
Restraint belt webbing must not be twisted when in
•
use.
WARNINGS!
Restraints should not be held away from body by
•
wheelchair components such as armrests or wheels.
Headrest should be positioned to support the back of
•
the head fully and not rest in the nape of the neck.
Pelvic restraints should make full contact across the
•
front of the body near the junction of the thigh and
pelvis
12.3 Special shipping requirements:
The wheelchair may be transported by road, rail, sea or air
and the batteries conform to IATA regulations.
CAUTION!
Before you travel, please contact the appropriate carrier.
The travel operator will be able to supply details of any
special requirements/instructions.
Ensure that any detachable parts are secured with
•
your mobility aid or separately packed and labelled so
they do not get lost during loading and unloading.
Take this Owner’s Manual with you.
•
The carrier will need to refer to the following sections.
•
How to lock/unlock the Joystick,
•
(Section 7).
How to disconnect the batteries,
•
(Section 11).
How to disconnect the drive,
•
(Section 5).
Fig.12.3
Fig.12.4
Fig.12.5