Programming Adapter User’s Guide
QF4A512-PA
Rev A5, Feb 09
4
www.quickfiltertech.com
Step 2: Make sure the power to the socket is “off” this done by pushing SW1 until the red light is OFF.
Step 3: Put a QF4A512 into the socket by pushing down evenly on both sides of the socket while making sure to take
note of the proper pin alignment of PIN1. See figure 4.
Red light should
be OFF when
changing parts
Make sure Pin1
lines up with the
socket Pin1
Figure 4
Step 4: Push SW1 so that the red LED is ON. See Figure 5
Figure 5
