INSTALLATION AND USE MANUAL
QUICK MC²X 40k
- REV002D
48
EN
40k
10 - Maintenance
10.2 - Periodic Maintenance
Periodic maintenance,
every 2000 hours
, must be performed by personnel authorized by
Quick
®
.
The Remote Control alerts, through a window (image below) that
periodic maintenance
must be performed.
The window appears in the middle of the screen. To close, press OK.
The wrench icon remains visible until maintenance is performed; despite the maintenance notice, the stabilizer will
continue to operate.
Active maintenance notification
• Contact the
Quick
®
service
to perform maintenance as soon as possible.
• In the event of problems with the machine due to lack of maintenance, the warranty is void during the notification
period and
Quick
®
assumes no liability for any problems with the
MC²X
.
• Once maintenance has been performed by a
Quick
®
technician, the icon will be reset.
Periodic maintenance table
SYSTEM / COMPONENT
ACTIVITY
PERIODIC
BEARINGS
CONTACT THE QUICK TECHNICAL SERVICE
EVERY 2000 HOURS
INVERTER
CONTACT THE QUICK TECHNICAL SERVICE
EVERY 2000 HOURS
PRECESSION
CONTACT THE QUICK TECHNICAL SERVICE
EVERY 2000 HOURS
0
25
-25
-50
50
75
-75
