INSTALLATION AND USE MANUAL
QUICK MC²X 40k
- REV002D
39
EN
40k
Fig.2
Fig.3
6 - Housing
6.2 - Installing a single stabilizer
LThe installation of a single stabilizer can be done in any area of the boat, taking into account the following necessary
indications for the correct operation of the appliance:
• We recommend installing the stabilizer in the
lower area of the hull
, taking into account the available space and the
environmental requirements described in
section 6.1
.
•
IMPORTANT: Position the stabilizer with the flywheel parallel to the hull’s longitudinal axis; the direction of
rotation, whether towards the bow or the stern, has no influence (Fig. 2)
.
6.3 - Installation of multiple units on the same boat
The installation of multiple stabilizers on the same boat can be done taking into account the following necessary
requirements for correct operation:
• We recommend installing the stabilizers in the
lower area of the hull
, taking into account the available space and the
environmental requirements described in
section 6.1.
•
IMPORTANT: position the stabilizers with the flywheel parallel to the hull’s longitudinal axis, alternating the
direction of rotation (Fig. 3).
Free choice of the position
in the area available
The bottom area of the
hull is recommended
Compulsory flywheel
direction with
respect to the boat
